F/V Conversion Module Frequency Conversion To 0-10V/5V Voltage Digital To Analog Converter Module
0HZ to 10K frequency pulse signal converted into 0-10V analog voltage signal.can be used for Interface conversion between PLC and converter. Or motion control card and inverter and other interface matching control occasions.
The input pulse level is 12V 24V 5V can be directly input, without need a series resistor.
F/V conversion module, response time 0.3-0.5 seconds.
F/v with the resistance transferred to the middle value, when the F/v corresponding to the following relations, 100HZ=0.1V, the accuracy is 1%, can't up to 2 digits after the decimal point,If the accuracy requirements are relatively high, the occasion is not good.
Each 100HZ frequency corresponding 0.1vdc relationship.Correspondence if not on time,Can be corrected onplate the potentiometer to revise.
1 * inverter module